4130B40 OUTLET PIPE FROM PUMP TO POWER STEERING CASE R R - Alfa - 147 - eLearn

3025301 - 4130B40 outlet pipe from pump to power steering case r r

) Position the vehicle on the ramp.Proceed with removal - 5530B10 battery - r+r .Proceed with removal - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. . Proceed with removal - 7055B54 under-engine guard - r r . Proceed with removal - 1072C44 exhaust manifold heat shield on bulkhead - r+r .Proceed with removal - 1080B40 catalytic pre-converter - r r . Proceed with removal - 4450B10 Front WHEEL (one) - R.R. (Left side).Proceed with removal - 4130B10 power steering fluid resevoir r r . Proceed with removal - 1072D22 Air flow switching device control ACTUATOR - R.R. . 1. Undo the connector (1a) and disconnect the delivery pipe from pump to power steering box (1b), pump side.

1. Undo the connector (1a) and disconnect the delivery pipe from pump to power steering box (1b), steering box side.2. Release the supply pipe from the pump to the steering box from the retaining band on the power steering box.

1. Remove the delivery pipe from pump to power steering box.

Refitting ( Removing

) Working beneath the car, refit the delivery pipe from pump to power steering box.1. Secure the supply pipe from the pump to the steering box to the retaining band on the power steering box.2. Connect the supply pipe from the pump to the power assisted steering box (2a), power assisted steering box side, and tighten the connector (2b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2b	Connector	PIPE BTWN PUMP + POWER STEERING BOX	M14	(Power assisted steering box side) 3.6 ÷ 4.4

1. Connect the supply pipe from pump to power steering box (1a), power steering pump side, and tighten the connector (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Connector	PIPE BTWN PUMP + POWER STEERING BOX	M16	(Power assisted steering pump side) 4.5 ÷ 5.5

Proceed with refitting - 1072D22 Air flow switching device control ACTUATOR - R.R. . Proceed with refitting - 4130B10 power steering fluid resevoir r r .Proceed with the refitting - 4450B10 Front WHEEL (one) - R.R. (Left side). Proceed with refitting - 1080B40 catalytic pre-converter - r r .Proceed with refitting - 1072C44 exhaust manifold heat shield on bulkhead - r+r . Proceed with refitting - 7055B54 under-engine guard - r r . Proceed with refitting - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. .Proceed with refitting - 5530B10 battery - r+r .Fill the power steering circuit with the recommended fluid.

	Type	Component	Name	Qty.
-	Oli [l]	POWER ASSISTED STEERING CIRCUIT	TUTELA GI/A	1.2

Bleed the power steering system as described belowWith the front wheels raised off the ground, with the engine switched off turn the steering wheel to full lock, left and right, 4-5 times.Check and, if necessary, top up the fluid level in the reservoir.Remove the car from the ramps.Start the engine and carry out 4 - 5 full steering wheel turn cycles (right and left).Top up the fluid level in the reservoir.