3025509 - 5510D10 spark plugs - r+r

Removing ( Refitting ) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

NameConnector
-Battery  A1B 
Proceed with removal  - 1016A40  ignition coil cover on cylinder head- r+r .Proceed with removal  - 5510C14  ignition coil/s - r+r .Blow through with compressed air in the spark plug openings and remove any impurities or traces of dirt.1. With the engine cold, remove the small side spark plugs (1a) and the large spark plugs (1b).
Check the condition of the spark plugs and, if necessary, replace them.
Using different spark plugs from those recommended can cause damage to the engine and alter the exhaust emission levels.
Place the large centre spark plugs (NGK BKR6EKPA) and the small side ones (NGK PMR7A) back in their housings and tighten them to torque.

FasteningComponentØValue(daNm)
--SIDE SPARK PLUGM10(Cylinder head side) 1.0 ÷ 1.3

FasteningComponentØValue(daNm)
--CENTRE SPARK PLUGM10(Cylinder head side) 2.3 ÷ 2.8
Proceed with refitting  - 5510C14  ignition coil/s - r+r .Proceed with refitting  - 1016A40  ignition coil cover on cylinder head- r+r .Connect the negative (-) battery terminal.