3025518 - 5520B12 starter motor - r+r for versions with a/c

Removing ( Refitting ) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF postition, then disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1B

Proceed with the removal  - 7055B54  under-engine guard - r r . Proceed with the removal  - 1072C44  exhaust manifold heat shield on bulkhead - r+r . Proceed with the removal  - 1080B40  catalytic pre-converter - r r . 1. Undo the nuts (1a) and disconnect the electrical connections from the starter motor.

	Name	Connector
1b	Starter' motor	A20

2. Undo the bolts (2a) and remove the starter motor (2b). Refitting ( Removing ) Refit the starter motor in its housing and fix it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	STARTER MOTOR	M8	(Gearbox side) 2.4 ÷ 3.0

Connect the electrical connections to the starter motor and fix them using the nuts. Proceed with the refitting  - 1080B40  catalytic pre-converter - r r .Proceed with the refitting  - 1072C44  exhaust manifold heat shield on bulkhead - r+r .Proceed with the refitting  - 7055B54  under-engine guard - r r . Connect the battery terminal (-).Remove the car from the ramp.