3025584 - 5550D18 handbrake on warning light switch - r+r

Removing ( Refitting )  - 3380A44  handbrake/linkage protection - r+r1. Place the handbrake in a lowered position in order to be able to gain access to the switch fixing bolts. 2. Using a screwdriver, undo the bolt fixing the switch.3. Lift up the handbrake lever.4. Move the switch slightly and disconnect the electrical connection.

NameConnector
5Handbrake switch  I40 
5. Recover the switch.
Refitting ( Removing ) Check that the switch is not damaged and, if necessary, conduct an electrical test on it.Connect the electrical connection to the switch.Position the switch, then lower the handbrake lever on the actual switch to keep it securely in place.Using a screwdriver, tighten the bolt fixing the switch.Check the operation of the handbrake warning light. - 3380A44  handbrake/linkage protection - r+r