5580P12 CONNECT PANEL REPLACE - Alfa - 147 - eLearn

3025624 - 5580P12 connect panel replace

Removing ( Refitting

) 1. Fit the tools in the special housings in Connect panel, making sure that they are correctly attached.

1. Extract the Connect panel pulling the tools.

1. Disconnect the electrical connections (1a, 1b, 1c, 1d).

	Name	Connector
1a	Radio	P20A

	Name	Connector
1b	Radio	P20B

	Name	Connector
1c	Radio	P20C

	Name	Connector
1d	Radio	P20D

2. Disconnect the radio aerial.3. Disconnect the GPS aerial.4. Disconnect the GSM aerial.5. Release the wiring (5a) from the retainers (5b).6. Recover the Connect panel.

Refitting ( Removing

) Check that the Connect panel is not damaged.1. Connect the electrical connections and the aerial connections.2. Position the wiring (2a) carefully as shown in the diagram and secure it to the retainers (2b).

Fit the Connect panel in its housing taking great care to avoid any interference with the cables at the rear. If there is interference, check that the cables are correctly positioned (see previous diagram). Check the operation of the Connect panel.