3025701 - 7010B14 rear side door catch striker r r

Removing ( Refitting ) 1. Undo the striker bolts.2. Remove the striker. Refitting ( Removing ) Check that the striker is undamaged.Fit the striker.1. Screw in the retaining bolts without tightening.2. Use the bolt slots to move the striker into the correct position.

Fit shims if necessary in order to adjust the striker accurately. Permitted adjustment movements are indicated by arrows.

Tighten the bolts.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	STRIKER ON REAR SIDE DOOR PILLAR	M6	2.4

Check the striker and catch fit together properly and ensure the door is aligned when closed.