3025775 - 7030B50 sun roof guide , one , lh or rh - r r
Removing
(
Refitting
)
- 7040H30 front pillar trim -
r r (left and right sides) - 7040L40 front compartment scuff strip - r r (left
and right sides)- 7040A22 instrument facia complementary trim element (one)
- arrange (left and right sides) - 7040H50 rear panel - r r (left
and right sides) - 7040H38 central pillar upper element - r r (left
and right sides) - 7040G30 boot light bulb holder - r r - 7040H42 rear pillar trim - r r (left
and right sides) - 7065C33 sun blind with courtesy mirror and courtesy light
one lh or rh r r (left and right sides) - 5580E22 Anti-theft device VOLUMETRIC SENSORS - R.R. after
checking electrical circuit - 7040E50 front modular courtesy light unit - r+r - 7040E16 rear courtesy light - r+r - 7030B34 sliding roof compartment decorative seal - r+r - 7040H16 roof panel lining - r r - 7030B10 sliding roof (assembly) - r+r with roof panel removed - 7030B40 drainage channel - r r - 7030B70 sun-roof control switch - r+r1. Manually run the slide (1a) backwards in its channel, until it
comes out.  | While the slide is moving, the peg (1b) before and after the slot (1c) must be inside or outside the rail (1d), as shown in the figure. |
Refitting
(
Removing
)
Check that the slide is not
damaged.If removed, ifit the slide with cable in
the main slide.1. Manually move the slide (1a) forwards in its rail, until its
comes out. | While the slide is moving, the peg (1b) before and after the slot (1c) must be inside or outside the rail (1d), as shown in the figure. |
