3026004 - 1088C42 thermostat - r + r with cylinder head removed

Removing ( Refitting ) Position the cylinder head on a suitable workbench.1. Disconnect the electrical connection from the engine coolant temperature sensor.

	Name	Connector
1	Engine temperature sender unit	K36

1. Undo the bolts (1a) and remove the thermostat (1b).2. Remove the seal. Refitting ( Removing ) Fit the thermostat, complete with gasket, and fix it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	THERMOSTAT	M8	(Cylinder head side) 2.3 ÷ 2.8

Connect the electrical connection to the engine coolant temperature sensor.