3026031 - 2110D32 milometer drive gear - r + r with inner differential case removed
 | The speedometer drive gaer is fitted on the differential even if it is not used. |
Removing
(
Refitting
)
1. Remove the speedometer drive gear (1a) using a reaction washer
and tools (1b) and (1c). | Name | Country |
|---|---|---|
| 1b | Extractor | 1.840.005.200 |
| Name | Country |
|---|---|---|
| 1c | Clamps | 1.840.005.103 |
Refitting
(
Removing
)
Place the speedometer drive ger back in
its housing after having heated it to a temperture of 100 to 120 degrees
C.
Removing
(
Refitting
)
Position the differential internal housing
in the vice fitted with protective jaws.1. Remove the front bearing (1a) using tools (1b) and (1c). | Name | Country |
|---|---|---|
| 1b | Extractor | 1.840.005.200 |
| Name | Country |
|---|---|---|
| 1c | Clamps | 1.840.005.103 |
Refitting
(
Removing
)
Fit the speedometer drive gear.1. Fit the front bearing (1a), using a hydraulic press, a suitable
plate (1b) and the fitting tool (1c). | Name | Country |
|---|---|---|
| 1c | Tool for Extracting/Fitting | 1.870.658.000 |
