The Body Computer
M1
receives the 'door open' input signals
at pin 8 (left door) and pin 25 (right door) of connector E.
The Body Computer
M1
is connected,
via the CAN line, to the controls in the front door
H44
according to the control logic described previously, which supplies
the two door courtesy lights
G51
and
G52
.
The unit
H44
is supplied by the
line protected by fuse F39 of the underdashboard control unit
B2
.
The 'low battery voltage' signal which switches
off the courtesy lights if they are on, always arrives via the CAN
See E1050 CAN CONNECTION LINES
.