4CarData
eLearn
Контакты
English
da 02/04
da 03/03 a 09/03
da 04/01 a 06/02
da 07/02 a 02/03
da 10/03 a 01/04
fino a 03/01
ALFA
147
2.0 TS
PROCEDURES
10 ENGINE
1020 CRANKCASE SUMP AND COVERS
1020D OIL SEALS ON CRANK SHAFT
1020D38 FLYWHEEL SIDE OIL SEAL - REPLACE
3024777 - 1020D38 flywheel side oil seal - replace
Removing
(
Refitting
)
Proceed with the removal
-
5530B10 battery - r+r
.
Proceed with the removal
-
5530B52 Battery DRIP TRAY/SUPPORT - R.R.
.
Proceed with the removal
-
4450B12 front or rear wheels (two) - r+r
.
Proceed with the removal
-
7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R.
(Right and left sides).
Proceed with the removal
-
7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.
(Right and left sides).
Proceed with the removal
-
7055B54 under-engine guard - r r
.
Proceed with the removal
-
2127C40 hydraulic speed selection hydraulic actuator unit and clutch - r r
.
Proceed with the removal
-
1016A40 ignition coil cover on cylinder head- r+r
.
Proceed with the removal
-
1072C44 exhaust manifold heat shield on bulkhead - r+r
.
Proceed with the removal
-
2110A11 manual gearbox with differential - r r for versions with hydraulic selection
.
Proceed with the removal
-
1810A28 clutch - r r for manual gearbox with hydraulic selection versions
.
Proceed with the removal
-
1024B11 engine flywheel - r r for manual gearbox with hydraulic selection versions
.
Proceed with the removal
-
1020D36 flywheel end oil seal - replace for manual gearbox with hydraulic selection versions
.
Refitting
(
Removing
)
Proceed with the refitting
-
1020D36 flywheel end oil seal - replace for manual gearbox with hydraulic selection versions
.
Proceed with the refitting
-
1024B11 engine flywheel - r r for manual gearbox with hydraulic selection versions
.
Proceed with the refitting
-
1810A28 clutch - r r for manual gearbox with hydraulic selection versions
.
Proceed with the refitting
-
2110A11 manual gearbox with differential - r r for versions with hydraulic selection
.
Proceed with the refitting
-
1072C44 exhaust manifold heat shield on bulkhead - r+r
.
Proceed with the refitting
-
1016A40 ignition coil cover on cylinder head- r+r
.
Proceed with the refitting
-
2127C40 hydraulic speed selection hydraulic actuator unit and clutch - r r
.
Refill the manual gearbox and differential
-
2110A04 Manual gearbox and differential OIL - Check level and top up, if necessary
.
Proceed with the refitting
-
7055B54 under-engine guard - r r
.
Check the level of the fluid in the electro-hydraulic selection gearbox and if necessary top it up
-
2127C04 ELECTROHYDRAULIC selection gearbox hydraulic system FLUID - Check level and top up if necessary.
.
Bleed the air from the electro-hydraulic selection gearbox hydraulic system
-
2127C06 Electro-hydraulic selection manual gearbox HYDRAULIC SYSTEM - Bleeding air
.
Proceed with the removal
-
7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R.
(Right and left sides).
Proceed with the removal
-
7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R.
(Right and left sides).
Proceed with the refitting
-
4450B12 front or rear wheels (two) - r+r
.
Proceed with the refitting
-
5530B52 Battery DRIP TRAY/SUPPORT - R.R.
.
Proceed with the refitting
-
5530B10 battery - r+r
.