3025460 - 5050B10 front windscreen washer jets - r+r clean and/or position

Removing ( Refitting ) Open the bonnet lid.1. Using the special tool, release the retaining buttons at the side of the sound insulation lining.

NameCountry
1Scraper blade1.823.015.000
1. Gently lower the sound insulation lining.2. Disconnect the pipe from the windscreen washer jet.3. Disconnect the electrical connection for the heated windscreen washer jet.

NameConnector
3Left windscreen washer jet defrosting resistance  O50 

NameConnector
3Right windscreen washer jet defrosting resistance  O51 
4. Using pliers, release the retainers and remove the windscreen washer jet.
Refitting ( Removing ) Check that the jet is not damaged or obstructed.Connect the pipe to the windscreen washer jet.Connect the electrical connection for the heated windscreen washer jet.Fit the jet in the housing engaging the retainers.Fit the soundproofing trim.Engage the retaining buttons.Close the bonnet lid.1. Act on the screw to adjust the spray on the windscreen.Test the operation of the windscreen washer jet.