3025867 - 7045B10 l/h or r/h front seat head restraint - r+r

FOLLOW ALL THE RECOMMENDED SAFETY FULES ( See assembly 5580C   air bag system ).

Removing ( Refitting )  - 7045A10  l/h or r/h front seat (one) - r+r - 7045A25  squab lumbar knob - r r1. Undo the side guard rear retaining bolts.2. Disconnect the two bottom ends of the squab cover, hooked onto each other.3. Pass the end of the trim through from the front part of the squab.4. Lift the cover as much as possible. 1. Release the cords from the retainers.2. Insert a hand under the cover and disconnect the side tensioning hooks.3. Lift the cover as much as possible.4. Disconnect the central flexible retainer and take out from the front side of the squab. 1. Raise the trim until the head restraint pin retaining tabs can be disengaged.2. Remove the head restraint. Refitting ( Removing ) Check that the head restraint is undamaged.Position the head restraint and fit into its seat. Engage the retaining tabs.Lower the trim.Connect the central elastic to the retainer.Connect the side tensioning hooks.Pull as appropriate and hook the cords to the retainers.Fully lower the trim and hook the two bottom ends of the squab cover to each other.Tighten the side shield rear retaining bolts. - 7045A25  squab lumbar knob - r r - 7045A10  l/h or r/h front seat (one) - r+r