3024752 - 1008A44 rear rigid mount - r r

Removing ( Refitting ) Position the vehicle on the ramp.Proceed with removal  - 7055B54  under-engine guard - r r .Proceed with removal  - 1076B82  left exhasust pipe between catalytic preconverter and converter r r .1. Position a hydraulic jack under the gearbox.2. Undo the bolt fixing the rear power unit rigid support to the flexible mounting.3. Undo the bolts (3a) and remove the rear support for the power unit (3b).
Refitting ( Removing ) 1. Refit the gearbox side power unit rear rigid support (1a) in its seating and tighten the bolts (1b) to the specified torque.

FasteningComponentØValue(daNm)
1bBoltPOWER UNIT RIGID REAR MOUNTM16(Manual gearbox/differential side) 10.8 ÷ 13.2
2. Tighten the bolt securing the rigid rear power unit support to the flexible mounting to the recommended torque.

FasteningComponentØValue(daNm)
2----
3. Remove the hydraulic jack from under the gearbox.
Proceed with refitting  - 1076B82  left exhasust pipe between catalytic preconverter and converter r r .Proceed with refitting  - 7055B54  under-engine guard - r r .Remove the car from the ramps.