1008B20 POWER UNIT INTERMEDIATE MOUNT FLEXIBLE BLOCK - REPLACE - Alfa - 147 - eLearn

3024756 - 1008B20 power unit intermediate mount flexible block - replace

) Position the vehicle on the ramp.Proceed with removal - 7055B54 under-engine guard - r r .Proceed with removal - 1076B82 left exhasust pipe between catalytic preconverter and converter r r .Proceed with removal - 1008A44 rear rigid mount - r r .1. Undo the nuts (1a) and remove the heat shield (1b).2. Undo the bolts (2a) and remove the flexible mounting for the power unit rear (2b).

Refitting ( Removing

) 1. Place the flexible mounting for the power unit rear support (1a) back in its housing and secure it by tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	INTERM RUBBER MOUNT	M8	(Front suspension crossmember side) 3.3 ÷ 3.9

2. Place the heat shield (2a) back in its housing and secure it using the nuts (2b).

Proceed with refitting - 1008A44 rear rigid mount - r r .Proceed with refitting - 1076B82 left exhasust pipe between catalytic preconverter and converter r r .Proceed with refitting - 7055B54 under-engine guard - r r .Remove the car from the ramps.