3024840 - 1056B81 run electronic ignition/injection control unit (single) self-learning procedure

.

During this procedure, from the moment when the instrument panel is supplied with power until the end of learning, do not press the accelerator, brake or clutch pedals.

Make sure that the ignition is off (STOP position).Connect the tool to the diagnostic socket and place the knob in position 3.

	Name	Country
-	MPX 97 switch	1.806.365.000

Connect the Examiner diagnostic equipment and follow the procedure described.

If the self-learning procedure is not correct, turn the ignition off (STOP position) and repeat the above procecure. If the incorrectness continues, check that the diagnostic cable connection is secure and that the instrument is working.