3024905 - 1088C10 water pump - r + r

Removing ( Refitting ) Position the vehicle on the ramp.Proceed with removal  - 4450B04  right front wheel r r .Proceed with removal  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. .Proceed with removal  - 7055B54  under-engine guard - r r .Proceed with removal  - 1092G10  single engine belt r r .Proceed with removal  - 1092A10  Crankshaft services PULLEY - R.R. .Proceed with removal  - 1032D12  timing system protective cover(s) - r + r .Proceed with removal  - 1016A42  left hand cylinder head ignition coil cover - r+r .Proceed with removal  - 5510C16  left hand cylinder head ignition coil - r+r .Proceed with removal  - 1016A30  left cam cover - r + r and replace gasket .Proceed with removal  - 1072B50  sleeves connecting air capacity box to inlet manifold is - r+r .Proceed with removal  - 5510C18  right hand cylinder head ignition coil - r+r .Proceed with removal  - 1016A34  right-hand cam cover - r + r and replace gasket .Proceed with removal  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement .Proceed with the removal  - 1032B54  toothed driven pulley left-hand head - r + rProceed with removal  - 1032B58  toothed driven pulley right-hand head - r + r .1. Undo the bolts (1a) and remove the timing belt fixed tensioners (1b).
Undo the bolt fixing the timing belt right rear cover to the alternator spacer.1. Undo the bolts (1a) and remove the rear timing gear covers (1b).
1. Undo the bolts (1a) and remove the water pump pulley (1b).
1. Press the two rapid attachment clips, by hand, and disconnect the lower coolant outlet hose from the radiator, radiator side.
Recover the coolant using a suitable container.
1. Undo the bolts fixing the water pump cover.Remove the bracket.
1. Undo the bolts (1a) and remove the water pump (1b).Remove the gasket.
Refitting ( Removing ) 1. Place the water pump (1a), complete with gasket, back in its housing and secure it tightening the bolts (1b) to the recommended torque.

FasteningComponentØValue(daNm)
1bBoltCOOLANT PUMPM6(Engine crankcase side) 0.8 ÷ 1.0
Remove the bracket from the housing.1. Tighten the bolts fixing the water pump cover to the recommended torque.
Make sure that the gasket is fitted between the cover and the water pump.

FasteningComponentØValue(daNm)
1----
Connect the rapid attachment for the lower coolant outlet hose from the radiator, radiator side.Place the water pump drive pulley back in its housing and secure it tightening the bolts.Place the side timing drive belt rear covers back in their housings and secure them using the bolts.Tighten the bolts fixing the timing belt right rear cover to the alternator spacer.1. Place the timing belt fixed tensioners (1a) back in their housings and secure them tightening the bolts (1b) to the recommended torque.

FasteningComponentØValue(daNm)
1bBoltCOOLANT PUMPM6(Engine crankcase side) 0.8 ÷ 1.0
Proceed with refitting  - 1032B58  toothed driven pulley right-hand head - r + r .Proceed with the refitting  - 1032B54  toothed driven pulley left-hand head - r + rProceed with refitting  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement .Proceed with refitting  - 1016A34  right-hand cam cover - r + r and replace gasket .Proceed with refitting  - 5510C18  right hand cylinder head ignition coil - r+r .Proceed with refitting  - 1072B50  sleeves connecting air capacity box to inlet manifold is - r+r .Proceed with refitting  - 1016A30  left cam cover - r + r and replace gasket .Proceed with refitting  - 5510C16  left hand cylinder head ignition coil - r+r .Proceed with refitting  - 1016A42  left hand cylinder head ignition coil cover - r+r .Proceed with refitting  - 1032D12  timing system protective cover(s) - r + r .Proceed with refitting  - 1092A10  Crankshaft services PULLEY - R.R. .Proceed with refitting  - 1092G10  single engine belt r r .Proceed with refitting  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. .Proceed with refitting  - 4450B04  right front wheel r r .Refill the engine cooling system with coolant  - 0010T20  coolant change .Proceed with refitting  - 7055B54  under-engine guard - r r .Remove the car from the ramps.