1076A70 HEAT SHIELD FOR LEFT CATALYTIC PRECONVERTER R R - Alfa - 147 - eLearn

3024980 - 1076A70 heat shield for left catalytic preconverter r r

) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal - 7055B54 under-engine guard - r r .Proceed with removal - 1080B92 left upper lambda sensor r r .1. Undo the bolt (1a) and the nuts (1b) and remove the heat shield for the left catalytic preconverter (1c).

Refitting ( Removing

) Place the heat shield for the left catalytic preconverter back in its housing, then fasten it using the bolt and the nuts. Proceed with refitting - 1080B92 left upper lambda sensor r r .Proceed with refitting - 7055B54 under-engine guard - r r .Connect the negative (-) battery terminal.Remove the car from the ramps.