1084C36 ENGINE OIL COOLING RADIATOR MOUNTING BRACKET - R.R. - Alfa - 147 - eLearn

3024996 - 1084C36 Engine oil cooling RADIATOR mounting BRACKET - R.R.

) Position the vehicle on the ramp.Proceed with removal - 7055B54 under-engine guard - r r .Proceed with removal - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. .Proceed with removal - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. .Proceed with removal - 7210E10 R.R. FRONT BUMPER .Proceed with removal - 1084C40 Air DUCT for engine oil cooling radiator - R.R . .1. Undo the nuts (1a) and move the engine oil cooling radiator (1b) without disconnecting the pipes.

1. Position a hydraulic jack under the rigid power unit support, timing side.2. Undo the nut fixing the timing side rigid engine support to the flexible mounting.Lower the hydraulic jack as necessary.3. Undo the bolts (3a) and remove the flexible block for the propulsion unit front support.

1. Keep the engine oil cooling radiator mounting bracket.

Refitting ( Removing

) Place the engine oil cooling radiator mounting bracket back in its housing.1. Place the flexible mounting for the power unit front support (1a) back in its housing and secure it by tightening the bolts (1b) to the recommended torque.

The bolts fixing the flexible mounting to the bodyshell also secure the engine oil cooling radiator mounting bracket.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	FRONT RUBBER MOUNTS	M8	(Bodyshell side) 3.2 ÷ 3.9

Place the timing side rigid engine support in contact with the flexible mounting using the hydraulic jack.2. Tighten the nut securing the timing side rigid engine support to the flexible mounting to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Nut	ENGINE MOUNT TIMING SIDE	M10	(Flexible mounting side) 4.5 ÷ 5.5

3. Remove the hydraulic jack.

Place the engine oil cooling radiator back in its housing and fix it using the nuts.Proceed with refitting - 1084C40 Air DUCT for engine oil cooling radiator - R.R . .Proceed with refitting - 7210E10 R.R. FRONT BUMPER .Proceed with refitting - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. .Proceed with refitting - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. .Proceed with refitting - 7055B54 under-engine guard - r r .Remove the car from the ramps.