3025258 - 3340B52 pump/central obs pipe - r r
Removing
(
Refitting
)
Position the vehicle on the
ramp.Proceed with removal - 4450B10 Front WHEEL (one) -
R.R. .Remove the protective cap on the brake
caliper bleed valve. Connect the collection system (pipe and
reservoir) to the bleed valve on the brake caliper.Operate the brake pedal until the brake-clutch
fluid reservoir is empty.
1. Undo the connectors (1a) and (1b) and remove the rigid pipe from
the master cylinder to the ABS hydraulic unit (1c) after releasing
it from the attachment (1d). 
Refitting
(
Removing
)
1. Place the rigid pipe from the master cylinder to the ABS hydraulic
unit (1a) back in its seating, tighten the connectors (1b) and (1c)
to the recommended torque and secure it with the attachment (1d). | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1b | Connector | PIPE FROM PUMP TO HYDRAULIC CONTROL UNIT | M12 | (Master cylinder side) 1.4 ÷ 1.8 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1c | Connector | PIPE FROM PUMP TO HYDRAULIC CONTROL UNIT | M12 | (A.B.S.) control unit side 1.4 ÷ 1.8 |
