3025509 - 5510D10 spark plugs - r+r

Removing ( Refitting ) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal  - 1016A42  left hand cylinder head ignition coil cover - r+r .Proceed with removal  - 5510C16  left hand cylinder head ignition coil - r+r .Proceed with removal  - 1072B50  sleeves connecting air capacity box to inlet manifold is - r+r .Proceed with removal  - 5510C18  right hand cylinder head ignition coil - r+r .Blow compressed air through the spark plug sockets to remove any foreign bodies or traces of dirt.1. With the engine cold, unscrew and remove the spark plugs.

Plug the spark plug sockets to prevent impurities from entering the system.

Check the condition of the engine spark plugs and, when necessary, replace them.

Using different spark plugs from those recommended can cause damage to the engine and alter the exhaust emission levels.

Refitting ( Removing ) Place the spark plugs back in their housings and tighten them to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	SPARK PLUGS	M14	(Cylinder head side) 2.4 ÷ 3.0

Proceed with refitting  - 5510C18  right hand cylinder head ignition coil - r+r .Proceed with refitting  - 1072B50  sleeves connecting air capacity box to inlet manifold is - r+r .Proceed with refitting  - 5510C16  left hand cylinder head ignition coil - r+r .Proceed with refitting  - 1016A42  left hand cylinder head ignition coil cover - r+r .Connect the negative (-) battery terminal.