3026139 - E1050 CAN CONNECTION LINES - Functional description (GTA)

Functional description

The Body Computer M1 is supplied directly by the battery from the line protected by the maxifuse CPL1 of B5 at pin 18 of connector F of the interface with the underdashboard control unit B2. The Body Computer M1 receives a supply controlled by the ignition (INT) at pin 9 of connector F of the interface with the underdashboard control unit B2 : this signal is designed to 'wake up the network'. Pin 10 of connector C and pin 8 of connector D M1 are earthed.

The nodes connected to the Body Computer M1 via the C-CAN are:

• engine management control unit M10 ;
• ABS control unit M50 (which is not connected directly, but via M10 );
• steering sensor unit for VDC K58 ;
• 'SELESPEED' gearbox control unit M54 - if fitted - (which is not connected directly, but via K58)

The following nodes are connected to the Body Computer M1 via B-CAN:

• climate control system control unit M70 ;
• instrument panel E50 ;
• radio or radio-phone-navigator P20 ;
• driver's door control unit H44 .