| | Results of the tests |
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|
| Connect
the diagnostic equipment (Examiner) and check whether there are
any faults in the system | Continue to Step 2 | - | |
| 2 | ACTIVE DIAGNOSIS WITH DIAGNOSTIC
EQUIPMENT | All
OK | Problems
met | Operation |
|---|
| Using
the diagnostic equipment, carry out the active diagnosis of the
LED | Continue to Step 4 | LED does not come on | Continue to Step 3 |
| 3 | WIRING CHECK | All OK | Problems met | Operation |
|---|
| Check
the continuity and insulation of the wiring between the Body Computer
and the panelCheck that the supply reaches the LED from the Body Computer See E7015 ALARM | Continue to Step 4 | The supply does not leave
the Body Computer for the LED | Replace the Body Computer Op. 5505A32 |
| The supply is sent correctly from the Body Computer but
the LED does not come on | Replace the LED in the panel Op. 5505A24 |
| 4 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | | Fault persists | Search for the fault starting from another symptom' |