3022563 - B01 IGNITION SWITCH NOT WORKING

Ошибка в шаблоне. В ближайшее время мы ее исправим. (Error in Templaite) When the ignition is turned ON nothing happens; the instruments do not light up. In the START position the starter motor does not turn.
Results of the tests
1BATTERY EFFICIENCY CHECKAll OKProblems metOperation
Check the efficiency of the battery using the appropriate diagnostic equipmentContinue to Step 2Battery not working properlyReplace battery
2CHECK FASTENINGSAll OKProblems metOperation

Check, in order:

  • Correct fixing or connection to earth of negative battery terminal
  • Correct fixing of positive battery terminal and that all leads are connected
  • No corrosion of the cable fastenings
  • Correct fixing and connection between positive terminal and control unit with maxifuse at battery
Continue to Step 3Cable fastenings at battery slackTighten cables
Earth lead frayedReplace lead Op.   5530B22 
Connections with slack fasteningsRestore fastenings
Maxifuse burntCheck the causes of the burnt fuse and replace it: wiring diagram See   E1010  SUPPLY
3CHECK ON SUPPLYAll OKProblems metOperation
Check switch supplyContinue to Step 4No supply reaches the switchCheck the continuity of the wiring between the maxifuse at the battery control unit and the switch See   E1010  SUPPLY
4CHECKING SWITCHAll OKProblems metOperation
Check condition and correct operation of the switchContinue to Step 5Switch contacts not working properlyReplace switch Op.   5520A12 
5CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer present