3022572 - C32 TRANSMISSION WARNING LIGHT PERMANENTLY ON
When the ignition is turned on, the robotized gearbox fault warning light symbol stays on.| Results of the tests | ||||
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
| Connect
the Examiner equipment to the diagnostic socket. Verify:
| Continue to Step 2 | Errors present in the control unit | Proceed in accordance with the information provided by the instrument | |
| 2 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Connect
the Examiner equipment to the diagnostic socket. Verify:
| Continue to Step 3 | Errors present in instrument panel | Proceed in accordance with the information provided by the instrument | |
| 3 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Connect the Examiner equipment to the diagnostic socket.Check in active diagnosis that the matrix display is working | Continue to Step 4 | Faulty display/instrument panel | Replace instrument panel Op. 5560B11 | |
| 4 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | Continue to Step 5 | Probable fault in Selespeed control unit | Replace Selespeed control unit Op. 2127E10 | |
| 5 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | Fault persists | Search for the fault starting from another symptom' | ||