C40 WITH DRIVER'S DOOR OPEN THE GEARBOX DOES NOT SWITCH TO N - Alfa - 147 - eLearn

When the driver's door is opened, with the engine started up and a gear engaged without pressing the brake pdal, the Selespeed does not switch to N.

1	BRAKE LIGHTS ELECTRICAL EQUIPMENT CHECK	All OK	Problems met	Operation
		Results of the tests
	Verify: brake lights fuse operation of brake lights switch adjustment of brake lights switch wiring between brake lights switch and body computer	Continue to Step 2	Fuse blown	Replace the fuse (then search for the cause of the problem)
			Faulty switch	Replace switch Op. 5550D10
			Switch adjustment incorrect	Switch adjustment
			Wiring defective	Restore the correct connections: See E2021 BRAKE LIGHTS
2	SWITCH IN LOCK CHECK	All OK	Problems met	Operation
	Verify: the operation of the switch in the diver's door. Wiring between switch and body computer.	Continue to Step 3	Switch in driver's door not working.	Replace lock
		Continue to Step 3	Wiring defective	Restore the correct connections: See E3040 CENTRAL LOCKING
3	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the Examiner to the diagnostic socket.Check for errors in the control unit	Continue to Step 4	Errors present	Continue according to the instructions for the diagnostic equipment
4	CORRECT OPERATION CHECK	All OK	Problems met	Operation
	Check that the fault is no longer present		Fault persists	Search for the fault starting from another symptom'