D02 ENGINE NOT RUNNING SMOOTHLY / (LOSING POWER) - Alfa - 147 - eLearn

3022580 - D02 ENGINE NOT RUNNING SMOOTHLY / (LOSING POWER)

Under conditions of constant load and speed, there are intermittent decreases in performance, even prolonged

0	PRELIMINARY CHECKS	All OK	Problems met	Operation
		Results of the tests
	Preliminarily check: the condition of air filter the condition of the air intake circuit	Continue to Step 1	Filter blocked	Replace the filter element Op. 1048A14
		Continue to Step 1	Air intake circuit fault	Eliminate the problem
1	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket Check: that there are no faults in the engine management control unit; plausibility of all the parameters	Continue to Step 2	'Supply system' error detected	Continue according to the instructions in See table Z50 MIXTURE STRENGTH ERROR
			'Misfire' error detected	Continue according to the instructions in See table Z53 MISFIRE ERROR
			Another error dectected in the control unit	Continue following the instructions for the diagnostic equipment
			Inconsistent parameter	Continue following the instructions for the diagnostic equipment
2	ROAD TEST WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Road test the vehicle, reproducing the conditions in which the fault arises, keeping the diagnostic equipment connected. Check: that there are no faults in the engine management control unit; plausibility of all the parameters	Continue to Step 3	'Supply system' error detected	Continue as instructed in the Table See table Z50 MIXTURE STRENGTH ERROR
			'Misfire' error detected	Continue as instructed in the Table See table Z53 MISFIRE ERROR
			Sudden occurrence of another error detected	Continue following the instructions for the diagnostic equipment
			Parameters inconsistent	Continue following the instructions for the diagnostic equipment
3	FUEL PRESSURE ROAD TEST	All OK	Problems met	Operation
	Road test the vehicle and check the fuel supply pressure Op. 0510C10 in the conditions that lead to the anomaly	Continue to Step 4	Insufficient fuel pressure: pipes obstructed	Remove the blockages and replace the pipes if necessary
		Continue to Step 4	Low fuel pressure: defective pump	Replace the fuel pump assembly Op. 1040A70
10	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists: control unit faulty	Replace control unit Op. 1056B82