| | Results of the tests |
| 1 | CHECK CONTROL CABLE TRAVEL | All OK | Problems met | Operation |
|---|
| Check
that the return travel of the control cables is unhindered | Continue to Step 2 | Control cables do not
run freely | Restore correct operation If damaged, replace the affected cables Op. 3380A30 |
| Control cables do not run freely | Restore correct operation If damaged, replace the affected cables Op. 3380A38 |
| 2 | CHECK OPERATING LEVER BUTTON | All OK | Problems met | Operation |
|---|
| Check
that the operating lever release button returns freely | Continue to Step 3 | Incorrect adjustment | Remove and release the button;
replace the operating lever if necessary Op. 3380A10 |
| 3 | CHECKING ATTACHMENT OF CABLE TO
REAR BRAKE | All
OK | Problems
met | Operation |
|---|
| Check
that the cable is attached correctly to the rear brake caliper | Continue to Step 4 | Cable attached incorrectly | Restore the correct attachment
of the cable to the brake caliper |
| 4 | CHECKING SELF-ADJUSTER | All OK | Problems met | Operation |
|---|
| Check
that the handbrake play take-up device is working properly | Continue to Step 5 | Rear brake caliper faulty | Replace the rear brake caliper
concerned Op. 3310B36 |
| 5 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | | Fault persists | Search for the fault starting from another symptom' |