K06 TRIP METER DOES NOT ZERO - Alfa - 147 - eLearn

With the ignition ON, the milometer cannot be zeroed using the button.

1	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
		Results of the tests
	Connect the Examiner to the diagnostic socket. Verify: that there are no faults in the instrument panel	Continue to Step 2	Errors present	Continue according to the instructions for the diagnostic equipment
2	CHECK ELECTRICAL CIRCUIT	All OK	Problems met	Operation
	Verify: connections between left control panel and instrument panel connections between left control panel and earth left control panel earth See E4010 INSTRUMENT PANEL	Continue to Step 3	Connections defective, earth defective	Restore the correct connections, if necessary, replace the wiring : See E4010 INSTRUMENT PANEL
3	LEFT CONTROL PANEL CHECK	All OK	Problems met	Operation
	Check that the left control panel is working properly: See E4010 INSTRUMENT PANEL	Continue to Step 4	Left control panel defective	Replace the left control panel Op. 5560B56
4	CORRECT OPERATION CHECK	All OK	Problems met	Operation
	Check that the fault is no longer present		Fault persists	Search for the fault starting from another symptom'