K08 DISPLAY DOES NOT SHOW OUTSIDE TEMPERATURE - Alfa - 147 - eLearn

With the ignition ON, the outside temperature is not displayed by the milometer.

0	PRELIMINARY CHECK	All OK	Problems met	Operation
		Results of the tests
	Verify: That the adjustment of the panel brightness has not been selected. That the mode button has not been pressed That there are no dashes displayed in place of the temperature That there are no failure messages displayed	Continue to Step 1	The display shows other information	Restore the display conditions using the left control panel
		Continue to Step 1	There are dashes in place of the temperature.	Continue to Step 2
1	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect an Examiner to the diagnostic socket Verify: that there are no faults the temperature measured by the driver's door Connector	Continue to Step 2	There are errors	Proceed in accordance with the instructions given by the diagnostic equipment
2	CHECKING ELECTRICAL CIRCUIT	All OK	Problems met	Operation
	Verify: That the connections between the outside temperature sensor and the driver's door connector are correct	Continue to Step 3	Connections defective	Restore the correct connections; if necessary, replace the wiring: See E4010 INSTRUMENT PANEL
3	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present		Fault persists	Search for the fault starting from another symptom'