K26 ENGINE COOLANT OVERHEATING WARNING LIGHT NOT WORKING - Alfa - 147 - eLearn

1	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
		Results of the tests
	Connect an Examiner to the diagnostic socket Verify: that there are no faults on the instrument panel that there are no faults on the i.e. control unit	Continue to Step 2	for faults on the instrument panel for faults on the i.e. control unit	Continue as instructed by the tester
2	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Keeping the Examiner or Examiner plus equipment connected to the diagnostic socket, check the operation of the warning light via active diagnosis.	Continue to Step 3	Warning light not working	Panel defective, replace instrument panel Op. 5560B11
3	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present		Fault persists	Replace i.e. control unit Op. 1056B82 Search for the fault starting from another symptom'