| | Results of the tests |
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|
| Connect
the Examiner to the diagnostic socketCheck warning light operation while in active diagnosis mode | Continue to Step 2 | The warning light does
not come on | Replace instrument panel Op. 5560B11 |
| 2 | CHECKING ELECTRICAL EQUIPMENT | All OK | Problems met | Operation |
|---|
| Check
body computer power supply is correct, particularly the D+ and +15
signal: See E5010 STARTING AND RECHARING | Continue to Step 3 | Body computer power supply incorrect. | Restore correct power supply |
| 3 | CHECKING BATTERY | All OK | Problems met | Operation |
|---|
| Check
the operation of the battery. | Continue to Step 4 | Battery not working | Replace the battery Op. 5530B10 |
| 4 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | | Fault persists | Search for the fault starting from another symptom' |