| | Results of the tests |
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|
| Connect
the diagnostic equipment (Examiner) to the diagnostic socket and
check whether there are errors in the engine management control
unit or the Body Computer | Continue to Step 2 | Errors detected in the
control unit | Continue following the instructions for the diagnostic
equipment |
| Errors detected in the Body Computer | Continue following the instructions for the diagnostic
equipment |
| 2 | SAFETY STARTING | All OK | Problems met | Operation |
|---|
| Remove
the supply for the Body Computer and start the vehicle using the
recovery procedure by pressing the accelerator pedal | Continue to Step 3 | The engine does not start | Replace control unit Op. 1056B82 |
| 3 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | | The fault persists: Body Computer defective | Replace the Body Computer
Op. 5505A32 Search for the fault starting
from another symptom' |