| | Results of the tests |
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|
| Firstly
check that there are no obstacles or dirt along the guide | Continue to Step 1 | Presence of foreign bodies along
seat travel | Clean guide rails |
| 1 | CHECKING TRAVEL LUBRICATION | All OK | Problems met | Operation |
|---|
| Check
the guides are properly lubricated | Continue to Step 2 | Lack of lubrication and increased
friction | Lubricate
the guides using a suitable product |
| 2 | CHECK SEAT RUNNER ATTACHMENTS | All OK | Problems met | Operation |
|---|
| Remove
the seat Op. 7045A10 . Check that the seat runners are attached
correctly to the car floor | Continue to Step 3 | Slide fastening loose | Tighten bolts securing slides
to car floor pan |
| 3 | CHECKING GUIDES AND SEAT SLIDE RELEASE | All OK | Problems met | Operation |
|---|
| Check
the condition of the seat sliding guides and make sure there is
no rust or distortions.Check the release lever for seat longitudinal adjustment. In
particular, check the condition and that it is correctly fixed | Continue to Step 4 | Faulty guide attachment | Refit the guides correctly Op. 7045A10 |
| Faulty guides | Replace the seat runner guides Op. 7045A70 |
| Release lever faulty | Repair or replace the release lever Op. 7045A29 |
| 4 | CORRECT OPERATION CHECK | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | | Fault persists | Search for the fault starting from another symptom' |
