| | Results of the tests |
| 1 | REEL CHECK | All OK | Problems met | Operation |
|---|
| Check
the condition of the reel and that it is correctly fitted.Check the reel angular lock.Check the reel inertia lock | Continue to Step 2 | Fitting not correct | See table O31 SEAT BELTS LOCKED |
| Angular lock not working | Replace the seat belt Op. 7065A12 |
| Inertia lock not working | Replace the seat belt Op. 7065A12 |
| 2 | HEIGHT ADJUSTER CHECK | All OK | Problems met | Operation |
|---|
| Carry
out a road test on a straight road with an even surface to check
that there is no noise coming from the seat belt area | Continue to Step 3 | Noise coming from the
height adjuster: fitting not correct | Refit correctly Op. 7065A18 |
| Noise coming from the height adjuster: component faulty | Replace the damaged components Op. 7065A18 |
| Noise coming from the buckle: fitting not correct | Loosen the fixing bolts, correctly position the references
and tighten to the recommended torque |
| Noise coming from the buckle: fixing not correct | Restore the correct fixing If necessary, replace the
belt Op. 7065A14 |
| Noise coming from the buckle: component faulty | Replace the damaged components Op. 7065A14 |
| Noise coming from the buckle: foreign bodies inside the
button | Remove foreign bodies |
| 3 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | | Fault persists | Search for the fault starting from another symptom' |