T26 WIND NOISE IN THE FRONT AREA - Alfa - 147 - eLearn

1	WIND NOISE AREA LOCATION	All OK	Problems met	Operation
		Results of the tests
	Test the vehicle until the speed is reached when the problem occurs to locate the area from which the wind noise is coming (if necessary, use bodywork adhesive tape)	Continue to Step 2	The wind noise is coming from the aerial mounting	Check gasket seal mounting distortion
			The wind noise is coming from the rear view mirror	Verify: gasket mounting distortion Op. 7065C68
			The noise is coming from the front doors	Verify: door alignment Op. 7005A14 glass alignment [PR7005D15] door surrounding seal [PR7005A34] glass seal [PR7005D33] outside glass scraper [PR7005D26] handles [PR7005C11]
			The noise is coming from the bonnet	Verify: bonnet alignment Op. 7025A22 wind noise buffers front seal on crossmember [PR7025A62] rear seal
			The noise is coming from the windscreen	Verify: perimeter seal seal Op. 7035A14 fixed lid windscreen wiper arm position [PR5050B38]
			The wind noise is coming from the front bumper	Verify: bumper alignment front pillar seal headlamp alignment alignment/fixing wheel arch seal Op. 7055B42
			The wind noise is coming from the spark out	Verify: cable loom seal
2	CORRECT OPERATION CHECK	All OK	Problems met	Operation
	Check that the fault is no longer present		Fault persists	Search for the fault starting from another symptom'