3024776 - 1020D18 front crank shaft cover oil seal - replace

Removing ( Refitting ) Position the vehicle on the ramp.Proceed with removal  - 4450B04  right front wheel r r .Proceed with removal  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. .Proceed with removal  - 1092G10  single engine belt r r .Proceed with removal  - 1092A10  Crankshaft services PULLEY - R.R. .Proceed with removal  - 1032D12  timing system protective cover(s) - r + r .Proceed with removal  - 1016A42  left hand cylinder head ignition coil cover - r+r .Proceed with removal  - 5510C16  left hand cylinder head ignition coil - r+r .Proceed with removal  - 1016A30  left cam cover - r + r and replace gasket .Proceed with removal  - 1072B50  sleeves connecting air capacity box to inlet manifold is - r+r .Proceed with removal  - 5510C18  right hand cylinder head ignition coil - r+r .Proceed with removal  - 1016A34  right-hand cam cover - r + r and replace gasket .Proceed with removal  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement .1. Remove the toothed drive pulley.2. Remove the spacer.
1. Remove the crankshaft key using a suitable drift.2. Remove the crankshaft front cover oil seal.
Take care not to damage the oil seal seat during removal.The operation of removing the oil seal destroys it, therefore it must always be replaced.
Refitting ( Removing ) 1. Fit a new crankshaft front oil seal (1a) using he tool (1b).

NameCountry
1bFitting tool1.860.949.000
Place the crankshaft key back in its housing.Place the spacer back in its housing.Place the drive pulley back in its housing.Proceed with refitting  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement .Proceed with refitting  - 1016A34  right-hand cam cover - r + r and replace gasket .Proceed with refitting  - 5510C18  right hand cylinder head ignition coil - r+r .Proceed with refitting  - 1072B50  sleeves connecting air capacity box to inlet manifold is - r+r .Proceed with refitting  - 1016A30  left cam cover - r + r and replace gasket .Proceed with refitting  - 5510C16  left hand cylinder head ignition coil - r+r .Proceed with refitting  - 1016A42  left hand cylinder head ignition coil cover - r+r .Proceed with refitting  - 1032D12  timing system protective cover(s) - r + r .Proceed with refitting  - 1092A10  Crankshaft services PULLEY - R.R. .Proceed with refitting  - 1092G10  single engine belt r r .Proceed with refitting  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. .Proceed with refitting  - 4450B04  right front wheel r r .Remove the car from the ramps.