1080E20 ACTIVE CARBON FILTER FOR FUEL VAPOURS - R + R - Alfa - 147 - eLearn

3024885 - 1080E20 active carbon filter for fuel vapours - r + r

) .

The active charcoal filter is managed together with the fuel vapour passage to the intake enablement solenoid and the connecting pipes and cannot therefore be dismantled into its individual components.

Position the vehicle on the ramp.Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

	Name	Connector
-	Battery	A1B

1. Disconnect the rapid attachments for the fuel vapour pipes.

Proceed with removal - 4450B04 right front wheel r r .Proceed with removal - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R. .Proceed with removal - 7055B91 Right front WHEEL ARCH LINER - R.R. .1. Disconnect the electrical connection from the inlet fuel vapour enabling solenoid valve.

	Name	Connector
1	Fuel vapour recovery solenoid	L10

2. Undo the nuts (2a) and remove the fuel vapour active charcoal filter (2b) complete with fuel vapour flow to the intake enablement solenoid valve (2c) and pipes (2d).

Refitting ( Removing

) Place the active charcoal filter for fuel vapours complete with fuel vapour flow to the intake enablement solenoid valve and pipes back in its housing, then fasten it using the nuts. Connect the electrical connection to the inlet fuel vapour enabling solenoid valve.Proceed with refitting - 7055B91 Right front WHEEL ARCH LINER - R.R. .Proceed with refitting - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R. .Proceed with refitting - 4450B04 right front wheel r r .Connect the rapid connectors for the fuel vapour pipes.Connect the negative (-) battery terminal.Remove the car from the ramps.