3025111 - 1820B30 OPERATING CYLINDER/CLUTCH HYDRAULIC ACTUATOR - R.R.

Removing ( Refitting ) Proceed with removal  - 5530B10  battery - r+r .Proceed with removal  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R. .Remove the protective cap on the master cylinder bleed valve.Connect the collection system (pipe and reservoir) to the bleed valve on the clutch operating cylinder.Operate the clutch pedal until the brake-clutch fluid reservoir is empty.1. Undo the connector (1a) and disconnect the pipe from the vibration damper to the operating cylinder (1b), operating cylinder side.2. Remove the circlip (2a) and remove the master cylinder (2b) from the support.
1. Undo the bolts (1a) and remove the operating cylinder support (1b).
Refitting ( Removing ) Place the operating cylinder mounting back in its housing and secure it using the bolts.1. Place the clutch operating cylinder (1a) back in its housing and secure it to the mounting using the circlip (1b).2. Connect the pipe from the vibration damper to the operating cylinder (2a), operating cylinder side and secure it tightening the connector (2b) to the recommended torque.

FasteningComponentØValue(daNm)
2b----
Bleed the air and top up the level in the hydraulic clutch system  - 0010T67  hydraulic clutch system bleed air .Bleed the air from the hydraulic braking system  - 0010T65  hydraulic brake system bleed air .Proceed with refitting  - 5530B52  Battery DRIP TRAY/SUPPORT - R.R. .Proceed with refitting  - 5530B10  battery - r+r .