3330C30 BRAKE FLUID RESERVOIR - R + R AND WASH INSIDE - Alfa - 147 - eLearn

3025231 - 3330C30 brake fluid reservoir - r + r and wash inside

) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal - 4450B02 left front wheel r r .Remove the protective cap on the brake caliper bleed valve. Connect the collection system (pipe and reservoir) to the bleed valve on the brake caliper. Operate the brake pedal until the brake-clutch fluid reservoir is empty. 1. Disconnect the electrical connection from the low brake-clutch fluid warning light switch.

	Name	Connector
1	Brake fluid level sensor (switch)	K25

2. Undo the nuts (2a) and lift up the brake fluid reservoir (2b), as necessary. 3. Disconnect the pipes between the brake fluid reservoir and the master cylinder, reservoir side. 4. Disconnect the flexible pipe from the reservoir to the clutch master cylinder, reservoir side. Remove the brake fluid reservoir.

Refitting ( Removing

) Wash the inside of the brake fluid reservoir.Connect the flexible pipe from the reservoir to the clurch master cylinder, reservoir side.Connect the pipes between the brake fluid reservoir and the master cylinder, reservoir side.Place the brake fluid reservoir back in its housing and secure it using the nuts.Connect the electrical connection from the low brake-clutch fluid warning light switch.Top up the brake-clutch fluid level - 0010T64 brake and or clutch fluid check level and top up as necessary .Bleed the air from the hydraulic braking system - 3330A14 HYDRAULIC BRAKING SYSTEM - Bleed air .Proceed with refitting - 4450B02 left front wheel r r .Connect the negative (-) battery terminal.Remove the car from the ramps.