3025502 - 5510C18 right hand cylinder head ignition coil - r+r

Removing ( Refitting ) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal  - 1072B50  sleeves connecting air capacity box to inlet manifold is - r+r .1. Disconnect the electrical connections from the right cylinder head ignition coils.

	Name	Connector
1	Ignition coil	A30

2. Undo the bolts (2a) and remove the ignition coils (2b) from the right cylinder head. Refitting ( Removing ) Place the ignition coils back in their housings on the right cylinder head and secure them by tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	IGNITION COIL/REEL	M6	(Tappet cover side) 0.8 ÷ 1.0

Connect the electrical connections to the right cylinder head ignition coils.Proceed with refitting  - 1072B50  sleeves connecting air capacity box to inlet manifold is - r+r .Connect the negative (-) battery terminal.