3024947 - 1008C14 engine link bracket - r r

Removing ( Refitting ) Position the vehicle on the ramp.Proceed with removal  - 4450B04  right front wheel r r .Proceed with removal  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. .Proceed with removal  - 1092G10  single engine belt r r .Proceed with removal  - 1092A10  Crankshaft services PULLEY - R.R. .Proceed with removal  - 1008C10  power unit upper reaction link r r .Proceed with removal  - 1032D12  timing system protective cover(s) - r + r .Proceed with removal  - 1016A42  left hand cylinder head ignition coil cover - r+r .Proceed with removal  - 5510C16  left hand cylinder head ignition coil - r+r .Proceed with removal  - 1048A28  vacuum air circuit resonator pipe - r+r .Proceed with removal  - 1016A30  left cam cover - r + r and replace gasket .Proceed with removal  - 1072B50  sleeves connecting air capacity box to inlet manifold is - r+r .Proceed with removal  - 5510C18  right hand cylinder head ignition coil - r+r .Proceed with removal  - 1016A34  right-hand cam cover - r + r and replace gasket .Proceed with removal  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement .Proceed with removal  - 1032B58  toothed driven pulley right-hand head - r + r .1. Undo the bolt (1a) and remove the upper fixed timing belt tensioner (1b).
1. Undo the bolts (1a) and remove the timing belt right rear protection (1b).2. Undo the bolt fixing the left rear protection to the bracket on the engine for the reaction rod.
1. Undo the nuts (1a) and remove the bracket on the engine for the reaction rod (1b).
Refitting ( Removing ) 1. Fit the bracket on the engine for the reaction rod (1a) and fix it tightening the nuts (1b) to the recommended torque.

FasteningComponentØValue(daNm)
1bNutREACTION LINK BRACKET ON ENGINEM10(Cylinder head side) 4.5 ÷ 5.5
Tighten the bolt fixing the left rear protection to the bracket on the engine for the reaction rod.Place the right rear timing guard back in its housing and fasten it using the bolts.1. Place the upper timing fixed tensioner (1a) back in its housing and secure it by tightening the bolt (1b) to the recommended torque.

FasteningComponentØValue(daNm)
1bBoltFIXED TENSIONERM10(Cylinder head side) 4.5 ÷ 5.5
Proceed with refitting  - 1032B58  toothed driven pulley right-hand head - r + r .Proceed with refitting  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement .Proceed with refitting  - 1016A34  right-hand cam cover - r + r and replace gasket .Proceed with refitting  - 5510C18  right hand cylinder head ignition coil - r+r .Proceed with refitting  - 1072B50  sleeves connecting air capacity box to inlet manifold is - r+r .Proceed with refitting  - 1016A30  left cam cover - r + r and replace gasket .Proceed with refitting  - 1048A28  vacuum air circuit resonator pipe - r+r .Proceed with refitting  - 5510C16  left hand cylinder head ignition coil - r+r .Proceed with refitting  - 1016A42  left hand cylinder head ignition coil cover - r+r .Proceed with refitting  - 1032D12  timing system protective cover(s) - r + r .Proceed with refitting  - 1008C10  power unit upper reaction link r r .Proceed with refitting  - 1092A10  Crankshaft services PULLEY - R.R. .Proceed with refitting  - 1092G10  single engine belt r r .Proceed with refitting  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. .Proceed with refitting  - 4450B04  right front wheel r r .Remove the car from the ramps.