1016A30 LEFT CAM COVER - R + R AND REPLACE GASKET - Alfa - 147 - eLearn

3024948 - 1016A30 left cam cover - r + r and replace gasket

) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal - 1016A42 left hand cylinder head ignition coil cover - r+r .Proceed with removal - 5510C16 left hand cylinder head ignition coil - r+r .Proceed with removal - 1048A28 vacuum air circuit resonator pipe - r+r .1. Undo the bolts (1a) and move the cable duct (1b) to the side.

1. Undo the bolts (1a) and remove the upper protective timing cover (1b).

1. Undo the bolts (1a) and the bolt (1b), then remove the bracket (1c).

1. Undo the nut (1a) and disconnect the earth lead (1b) from the left tappet cover.

	Name	Connector
1b	Earth on engine	C40

2. Loosen the band and disconnect the oil vapour recovery pipe from the left tappet cover.

1. Undo the bolts (1a) and remove the left side tappet cover (1b) complete with gasket.

One of the bolts fixing the tappet cover also fastens the engine oil dipstick guide pipe mounting bracket.

Refitting ( Removing

) 1. Place the left tappet cover (1a), complete with gasket, back in its housing and secure it tightening the bolts (1b) to the recommended torque.

One of the bolts fixing the tappet cover also fastens the engine oil dipstick guide pipe mounting bracket.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	CAM COVERS	M7	(Cylinder head side) 1.4 ÷ 1.7

Connect the engine oil vapour recovery pipe to the left tappet cover and tighten the band.Connect the earth lead to the left tappet cover and secure it using the nut.Place the bracket back in its housing and secure it using the bolts.Fit the upper protective timing gear cover and fix it using the bolts.Place the cable duct back in its housing in the left tappet cover and fix it using the bolts.Proceed with refitting - 1048A28 vacuum air circuit resonator pipe - r+r .Proceed with refitting - 5510C16 left hand cylinder head ignition coil - r+r .Proceed with refitting - 1016A42 left hand cylinder head ignition coil cover - r+r .Connect the negative (-) battery terminal.