3024970 - 1036E58 front oil seal of r/h overhead camshafts - replace

Removing ( Refitting ) Position the vehicle on the ramp.Proceed with removal  - 4450B04  right front wheel r r .Proceed with removal  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. .Proceed with removal  - 1092G10  single engine belt r r .Proceed with removal  - 1092A10  Crankshaft services PULLEY - R.R. .Proceed with removal  - 1032D12  timing system protective cover(s) - r + r .Proceed with removal  - 1016A42  left hand cylinder head ignition coil cover - r+r .Proceed with removal  - 5510C16  left hand cylinder head ignition coil - r+r .Proceed with removal  - 1016A30  left cam cover - r + r and replace gasket .Proceed with removal  - 1072B50  sleeves connecting air capacity box to inlet manifold is - r+r .Proceed with removal  - 5510C18  right hand cylinder head ignition coil - r+r .Proceed with removal  - 1016A34  right-hand cam cover - r + r and replace gasket .Proceed with removal  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement .Proceed with removal  - 1032B58  toothed driven pulley right-hand head - r + r .Proceed with removal  - 1008C14  engine link bracket - r r .1. Undo the bolts (1a) and remove the right cylinder head camshaft front caps (1b).2. Release and remove the oil seals for the right cylinder head camshafts. Refitting ( Removing ) Place the camshaft front caps back in their housings in the right cylinder head following the sequence shown in the diagram. Tighten the bolts fixing the right cylinder head camshaft front caps to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CAMSHAFT CAPS/	M8	(Cylinder head side) 1.8 ÷ 2.0

1. Fit the camshaft front oil seals (1a) using the tool (1b).

	Name	Country
1b	Fitting tool	1.860.948.000

Proceed with refitting  - 1008C14  engine link bracket - r r .Proceed with refitting  - 1032B58  toothed driven pulley right-hand head - r + r .Proceed with refitting  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement .Proceed with refitting  - 1016A34  right-hand cam cover - r + r and replace gasket .Proceed with refitting  - 5510C18  right hand cylinder head ignition coil - r+r .Proceed with refitting  - 1072B50  sleeves connecting air capacity box to inlet manifold is - r+r .Proceed with refitting  - 1016A30  left cam cover - r + r and replace gasket .Proceed with refitting  - 5510C16  left hand cylinder head ignition coil - r+r .Proceed with refitting  - 1016A42  left hand cylinder head ignition coil cover - r+r .Proceed with refitting  - 1032D12  timing system protective cover(s) - r + r .Proceed with refitting  - 1092A10  Crankshaft services PULLEY - R.R. .Proceed with refitting  - 1092G10  single engine belt r r .Proceed with refitting  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. .Proceed with refitting  - 4450B04  right front wheel r r .Remove the car from the ramps.