3025241 - 3330E10 FLEXIBLE PIPE (one), left or right, to front brake calipers - R.R .
Removing
(
Refitting
)
Position the vehicle on the ramp.Proceed with removal - 4450B02 left front wheel r r .Remove the protective cap on the brake
caliper bleed valve. Connect the collection system (pipe and
reservoir) to the bleed valve on the brake caliper.Operate the brake pedal until the brake-clutch
reservoir and pipes are empty.1. Undo the connectors (1a) and remove the rigid pipe to the brake
caliper (1b).2. Remove the stop (2a) and release the hose to the front brake
caliper (2b) from the bottom bracket.Release the retaining clip on the front
brake caliper hose from the central mounting bracket.3. Undo the connector on the front brake caliper flexible pipe,
rigid pipe side.4. Remove the fastener and release the front brake caliper hose
from the top mounting bracket, then remove it.
Refitting
(
Removing
)
1. Refit the front brake caliper hose in its seating, then secure
it to the top mounting bracket with the fastener. 2. Tighten the connector on the front brake caliper flexible pipe,
rigid pipe side. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 2 | Bolt | LOWER ROD ON ENGINE | M12 x 1.25 | 12 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 4b | Connector | FITTING FOR PIPE TO CALIPER | M10 | (Brake caliper side) 1.4 ÷1.8 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 4b | Connector | FITTING FOR PIPE TO CALIPER | M10 | (Flexible pipe side) 1.4 ÷ 1.8 |
