3024799 - 1032C32 fixed timing system tensioner (one) r + r
Removing
(
Refitting
)
Position the vehicle on the ramp.Proceed with removal - 4450B04 right front wheel r
r .Proceed with removal - 7055B64 Engine compartment DUST
shield in front wheel arch (one), left or right - R.R. .Proceed with removal - 1092G10 single engine belt r r .Proceed with removal - 1092A10 Crankshaft services PULLEY
- R.R. .Proceed with removal - 1032D12 timing system protective
cover(s) - r + r .Proceed with removal - 1016A42 left hand cylinder head
ignition coil cover - r+r .Proceed with removal - 5510C16 left hand cylinder head
ignition coil - r+r .Proceed with removal - 1016A30 left cam cover - r + r
and replace gasket .Proceed with removal - 1072B50 sleeves connecting air
capacity box to inlet manifold is - r+r .Proceed with removal - 5510C18 right hand cylinder head
ignition coil - r+r .Proceed with removal - 1016A34 right-hand cam cover
- r + r and replace gasket .Proceed with removal - 1032B10 toothed timing belt -
r + r for timing adjustment or replacement .FOR THE TIMING BELT UPPER FIXED TENSIONER,
PROCEED AS FOLLOWS.1. Undo the bolt (1a) and remove the upper fixed timing belt tensioner
(1b).FOR THE TIMING BELT LOWER FIXED TENSIONER,
PROCEED AS FOLLOWS.2. Undo the bolt (2a) and remove the lower fixed timing belt tensioner
(2b).
Refitting
(
Removing
)
Fit the fixed timing belt tensioner and
secure by tightening the bolt to the recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | FIXED TENSIONER | M10 | (Cylinder head side) 4.5 ÷ 5.5 |