1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R - Alfa - 147 - eLearn

3024841 - 1056B82 injection/ignition system e.c.u. (one) - r + r

) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connections (1a) and (1b) from the injection/ignition system control unit.

	Name	Connector
1a	Engine management ECU	M10A

	Name	Connector
1b	Engine management ECU	M10B

1. Undo nuts (1a) and remove injection/ignition control unit (1b).

Refitting ( Removing

) Place the injection/ignition system control unit back in its housing and fix it using the bolts.Connect the electrical connections to the fuel injection/ignition control unit.Connect the negative (-) battery terminal.

If a new injection/ignition system control unit is being fitted, carry out the self-learning procedure for it - 1056B81 run electronic ignition/injection control unit (single) self-learning procedure .