3024919 - 1092A10 Crankshaft services PULLEY - R.R.

Removing ( Refitting ) Position the vehicle on the ramp.Proceed with removal  - 4450B08  right rear wheel r r .Proceed with removal  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. .Proceed with removal  - 1092G10  single engine belt r r .1. Fit the crankshaft pulley counter-torque tool.

NameCountry
1Counter-torque for crankshaft1.870.646.000
2. Slacken the crankshaft pulley nut.
Remove the crankshaft pulley counter-torque tool.1. Fully undo the nut (1a) and remove the crankshaft pulley (1b).
Refitting ( Removing ) Place the crankshaft pulley back in its housing and secure it without tightening the nut.1. Fit the crankshaft pulley counter-torque tool.

NameCountry
1Counter-torque for crankshaft1.870.646.000
2. Tighten the crankshaft pulley nut to the specified torque.

FasteningComponentØValue(daNm)
2Left thread nutCRANKSHAFT PULLEYM28(Crankshaft side) 22.8 ÷ 25.2
Remove the crankshaft pulley counter-torque tool.
Proceed with refitting  - 1092G10  single engine belt r r .Proceed with refitting  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. .Proceed with refitting  - 4450B08  right rear wheel r r .Remove the car from the ramps.