3024984 - 1076B84 right exhaust pipe between caralytic preconverter and converter r r
Removing
(
Refitting
)
Position the vehicle on the ramp.Proceed with removal - 7055B54 under-engine guard -
r r .1. Undo the bolt and remove the bracket joining the exhaust pipes
between the preconverters and the catalytic converter.2. Undo the nuts (2a) and (2b), then remove the right exhaust pipe
between the preconverter and the catalytic converter (2c).Remove the gaskets.
Refitting
(
Removing
)
1. Place the right exhaust pipe between the preconverter and the
catalytic converter (1a), complete with gaskets, back in its housing,
then tighten the nuts (1b) and (1c) to the recommended torque.  | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1b | Nut | RIGHT PRECONVERTER.CONVERTER PIPE/ | M8 | (Catalytic converter side) 2.3 ÷ 2.8 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1c | Nut | RIGHT PRECONVERTER.CONVERTER PIPE/ | M8 | (Catalyitic preconverter side) 2.3 ÷ 2.8 |
