3025311 - 4130B99 Power assisted steering fluid RADIATOR mounting BRACKET - R.R.

Removing ( Refitting ) Position the vehicle on the ramp.Proceed with removal  - 7055B54  under-engine guard - r r .Proceed with removal  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. .Proceed with removal  - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. .Proceed with removal  - 7210E10  R.R. FRONT BUMPER .Remove the power steering fluid cooling radiator air duct from its seating.Proceed with removal  - 4130B98  Power assisted steering fluid cooling RADIATOR - R.R. .1. Undo the nuts (1a) and remove the mounting bracket for the power assisted steering fluid radiator (1b). Refitting ( Removing ) Place the power assisted steering fluid radiator mounting bracket in its housing and secure it using the nuts.Proceed with refitting  - 4130B98  Power assisted steering fluid cooling RADIATOR - R.R. .Refit the power steering fluidl cooling radiator duct in its seating.Proceed with refitting  - 7210E10  R.R. FRONT BUMPER .Proceed with refitting  - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. .Proceed with refitting  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. .Proceed with refitting  - 7055B54  under-engine guard - r r .Fill the power steering circuit with the recommended fluid.

	Type	Component	Name	Qty.
-	Fluid [l]	HYDRAULIC POWER ASSISTED STEERING SYSTEM	TUTELA GI/A	1.2

The table shows the total quantity of fluid present in the power assisted steering circuit.

Bleed the power steering system as described belowWith the front wheels raised off the ground, with the engine switched off turn the steering wheel to full lock, left and right, 4-5 times.Check and, if necessary, top up the fluid level in the reservoir.Remove the car from the ramps.Start the engine and carry out 4 - 5 full steering wheel turn cycles (right and left).Top up the fluid level in the reservoir.